Pedrollo BC-ST Stainless Steel Double-Channel Sewage Pumps
The Pedrollo BC-ST is a stainless steel submersible double-channel sewage pump. It drains dirty water and sewage in domestic, civil and industrial settings. Six models, three single-phase and three three-phase, deliver up to 850 l/min and up to 17 m head.
Every model has an AISI 304 stainless steel pump body and a micro-cast AISI 304 two-channel impeller. It passes solids up to Ø 50 mm through a 2″ threaded port. Single-phase BCm models include a float switch and Schuko plug.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| BCm 10/50-ST | 2300870 | Single Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| BCm 15/50-ST | 2300880 | Single Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| BCm 20/50-ST | 2300890 | Single Phase | 1.5 kW / 2 HP | 50–850 l/min | 16–3 m |
| BC 10/50-ST | 2300900 | Three Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| BC 15/50-ST | 2300910 | Three Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| BC 20/50-ST | 2300920 | Three Phase | 1.5 kW / 2 HP | 50–850 l/min | 16–3 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
6 products
The Pedrollo BCm 10/50-ST is a stainless steel submersible double-channel sewage pump. It has a 0.75 kW (1 HP) motor on a 230 V single-phase…
The Pedrollo BCm 15/50-ST is a stainless steel submersible double-channel sewage pump. It has a 1.1 kW (1.5 HP) motor on a 230 V single-phase…
The Pedrollo BCm 20/50-ST is a stainless steel submersible double-channel sewage pump. It has a 1.5 kW (2 HP) motor on a 230 V single-phase…
The Pedrollo BC 10/50-ST is a stainless steel submersible double-channel sewage pump. It has a 0.75 kW (1 HP) motor on a 400 V three-phase…
The Pedrollo BC 15/50-ST is a stainless steel submersible double-channel sewage pump. It has a 1.1 kW (1.5 HP) motor on a 400 V three-phase…
The Pedrollo BC 20/50-ST is a stainless steel submersible double-channel sewage pump. It has a 1.5 kW (2 HP) motor on a 400 V three-phase…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo BC-ST Stainless Steel Double-Channel Sewage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.