Pedrollo UP Multi-Stage Submersible Pumps
The Pedrollo UP is a stainless steel multi-stage submersible pump without float switch for clean water in domestic, civil and agricultural use. Twenty-one models, 11 single-phase and 10 three-phase, deliver up to 180 l/min and up to 94 m head, with motors from 0.37 to 1.5 kW.
AISI 304 stainless steel outer sleeve and internal motor jacket, with anti-vibration feet, Noryl™ impellers and diffusers, AISI 431 shaft, double mechanical seal in an oil chamber and automatic vent valve. Patented anti-stall design, WRAS-approved DRINCABLE® power cable, 1¼″ delivery, sand up to 150 g/m³ and installation to 20 m depth. Runs vertically or horizontally (support kit sold separately).
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| UPm 2/2 | 2200630 | Single Phase | 0.37 kW / 0.5 HP | 10–80 l/min | 32–16.4 m |
| UPm 2/3 | 2200640 | Single Phase | 0.55 kW / 0.75 HP | 10–80 l/min | 47–24 m |
| UPm 2/4 | 2200650 | Single Phase | 0.75 kW / 1 HP | 10–80 l/min | 62.5–32 m |
| UPm 2/5 | 2200660 | Single Phase | 1.1 kW / 1.5 HP | 10–80 l/min | 78–40 m |
| UPm 2/6 | 2200670 | Single Phase | 1.5 kW / 2 HP | 10–80 l/min | 94–48 m |
| UPm 4/3 | 2200680 | Single Phase | 0.55 kW / 0.75 HP | 20–120 l/min | 39–12 m |
| UPm 4/4 | 2200690 | Single Phase | 0.75 kW / 1 HP | 20–120 l/min | 52–16 m |
| UPm 4/5 | 2200700 | Single Phase | 1.1 kW / 1.5 HP | 20–120 l/min | 65–20 m |
| UPm 4/6 | 2200710 | Single Phase | 1.5 kW / 2 HP | 20–120 l/min | 78–24 m |
| UPm 8/3 | 2200720 | Single Phase | 1.1 kW / 1.5 HP | 40–180 l/min | 39–9 m |
| UPm 8/4 | 2200730 | Single Phase | 1.5 kW / 2 HP | 40–180 l/min | 52–12 m |
| UP 2/3 | 2200750 | Three Phase | 0.55 kW / 0.75 HP | 10–80 l/min | 47–24 m |
| UP 2/4 | 2200760 | Three Phase | 0.75 kW / 1 HP | 10–80 l/min | 62.5–32 m |
| UP 2/5 | 2200770 | Three Phase | 1.1 kW / 1.5 HP | 10–80 l/min | 78–40 m |
| UP 2/6 | 2200780 | Three Phase | 1.5 kW / 2 HP | 10–80 l/min | 94–48 m |
| UP 4/3 | 2200790 | Three Phase | 0.55 kW / 0.75 HP | 20–120 l/min | 39–12 m |
| UP 4/4 | 2200800 | Three Phase | 0.75 kW / 1 HP | 20–120 l/min | 52–16 m |
| UP 4/5 | 2200810 | Three Phase | 1.1 kW / 1.5 HP | 20–120 l/min | 65–20 m |
| UP 4/6 | 2200820 | Three Phase | 1.5 kW / 2 HP | 20–120 l/min | 78–24 m |
| UP 8/3 | 2200830 | Three Phase | 1.1 kW / 1.5 HP | 40–180 l/min | 39–9 m |
| UP 8/4 | 2200840 | Three Phase | 1.5 kW / 2 HP | 40–180 l/min | 52–12 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
21 products
The Pedrollo UPm 2/2 is a 0.37 kW (0.5 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 80…
The Pedrollo UPm 2/3 is a 0.55 kW (0.75 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 80…
The Pedrollo UPm 2/4 is a 0.75 kW (1 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 80…
The Pedrollo UPm 2/5 is a 1.1 kW (1.5 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 80…
The Pedrollo UPm 2/6 is a 1.5 kW (2 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 80…
The Pedrollo UPm 4/3 is a 0.55 kW (0.75 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 120…
The Pedrollo UPm 4/4 is a 0.75 kW (1 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 120…
The Pedrollo UPm 4/5 is a 1.1 kW (1.5 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 120…
The Pedrollo UPm 4/6 is a 1.5 kW (2 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 120…
The Pedrollo UPm 8/3 is a 1.1 kW (1.5 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 180…
The Pedrollo UPm 8/4 is a 1.5 kW (2 HP) stainless steel multi-stage submersible pump on a 230 V single-phase supply, delivering up to 180…
The Pedrollo UP 2/3 is a 0.55 kW (0.75 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 80…
The Pedrollo UP 2/4 is a 0.75 kW (1 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 80…
The Pedrollo UP 2/5 is a 1.1 kW (1.5 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 80…
The Pedrollo UP 2/6 is a 1.5 kW (2 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 80…
The Pedrollo UP 4/3 is a 0.55 kW (0.75 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 120…
The Pedrollo UP 4/4 is a 0.75 kW (1 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 120…
The Pedrollo UP 4/5 is a 1.1 kW (1.5 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 120…
The Pedrollo UP 4/6 is a 1.5 kW (2 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 120…
The Pedrollo UP 8/3 is a 1.1 kW (1.5 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 180…
The Pedrollo UP 8/4 is a 1.5 kW (2 HP) stainless steel multi-stage submersible pump on a 400 V three-phase supply, delivering up to 180…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo UP Multi-Stage Submersible Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.