Pedrollo BC Heavy-Duty Double-Channel Sewage Pumps /35, /50 and BC4
The Pedrollo BC /35, /50 and BC4 is a heavy-duty three-phase submersible double-channel sewage pump in thick stainless steel and cast iron, for sewage, sludge-mixed water, and activated and putrid sludge in sewers, tunnels, excavations, canals and underground car parks. Six models deliver up to 2,300 l/min and up to 27.5 m head with motors from 3 to 5.5 kW, plus the 4-pole BC4 10/50 (0.75 kW, 1,450 rpm).
Cast iron pump body and two-channel impeller with cataphoresis treatment, AISI 304 motor sleeve, AISI 431 shaft and a double mechanical seal with an oil chamber. The BC /35 models pass solids up to Ø 35 mm with a DN65 PN10 flange; the BC /50 models and BC4 10/50 pass solids up to Ø 50 mm with a DN80 PN10 flange. 10 m cable, built-in thermal protection, installation to 10 m depth.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| BC 40/35 | 2302570 | Three Phase | 3 kW / 4 HP | 300–1500 l/min | 18.5–5.5 m |
| BC 55/35 | 2302580 | Three Phase | 4 kW / 5.5 HP | 300–1700 l/min | 22.5–7.5 m |
| BC 75/35 | 2302590 | Three Phase | 5.5 kW / 7.5 HP | 300–1900 l/min | 27.5–10 m |
| BC 40/50 | 2302600 | Three Phase | 3 kW / 4 HP | 300–1800 l/min | 16–4.5 m |
| BC 55/50 | 2302610 | Three Phase | 4 kW / 5.5 HP | 300–2100 l/min | 20–6 m |
| BC 75/50 | 2302620 | Three Phase | 5.5 kW / 7.5 HP | 300–2300 l/min | 24.5–7.5 m |
| BC4 10/50 | 2305540 | Three Phase | 0.75 kW / 1 HP | 100–1200 l/min | 6–1 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
7 products
The Pedrollo BC 40/35 is a 3 kW (4 HP) heavy-duty submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo BC 55/35 is a 4 kW (5.5 HP) heavy-duty submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo BC 75/35 is a 5.5 kW (7.5 HP) heavy-duty submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo BC 40/50 is a 3 kW (4 HP) heavy-duty submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo BC 55/50 is a 4 kW (5.5 HP) heavy-duty submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo BC 75/50 is a 5.5 kW (7.5 HP) heavy-duty submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo BC4 10/50 is a 0.75 kW (1 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo BC Heavy-Duty Double-Channel Sewage Pumps /35, /50 and BC4. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.