Pedrollo MC Free-Standing Double-Channel Sewage Pumps /50 and /65
The Pedrollo MC /50 and /65 is a free-standing submersible double-channel sewage pump in thick cast iron, for sewage, waste water, sludge-mixed water, and activated and putrid sludge in sewers, tunnels, excavations, canals and underground car parks. Ten models deliver up to 1,600 l/min and up to 24 m head, with motors from 1.1 to 3 kW.
Cast iron pump body, motor holder and bracket with cataphoresis treatment, micro-cast AISI 304 two-channel impeller, AISI 431 shaft and a double mechanical seal with an oil chamber. The /50 models pass solids up to Ø 50 mm with a 2½″ delivery; the /65 models pass solids up to Ø 65 mm with a 3″ delivery. 10 m cable, installation to 10 m depth. Single-phase MCm models come with a control panel and float switch.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| MCm 15/50 | 2301800 | Single Phase | 1.1 kW / 1.5 HP | 100–800 l/min | 14–1 m |
| MCm 20/50 | 2301810 | Single Phase | 1.5 kW / 2 HP | 100–900 l/min | 16–1 m |
| MCm 30/50 | 2301820 | Single Phase | 2.2 kW / 3 HP | 100–1100 l/min | 22–2 m |
| MCm 30/65 | 2301830 | Single Phase | 2.2 kW / 3 HP | 200–1500 l/min | 12–2 m |
| MC 15/50 | 2301840 | Three Phase | 1.1 kW / 1.5 HP | 100–800 l/min | 14–1 m |
| MC 20/50 | 2301850 | Three Phase | 1.5 kW / 2 HP | 100–900 l/min | 16–1 m |
| MC 30/50 | 2301860 | Three Phase | 2.2 kW / 3 HP | 100–1100 l/min | 22–2 m |
| MC 40/50 | 2301870 | Three Phase | 3 kW / 4 HP | 100–1100 l/min | 24–4 m |
| MC 30/65 | 2301880 | Three Phase | 2.2 kW / 3 HP | 200–1500 l/min | 12–2 m |
| MC 40/65 | 2301890 | Three Phase | 3 kW / 4 HP | 200–1600 l/min | 15–4 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
10 products
The Pedrollo MCm 15/50 is a 1.1 kW (1.5 HP) free-standing submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to…
The Pedrollo MCm 20/50 is a 1.5 kW (2 HP) free-standing submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to…
The Pedrollo MCm 30/50 is a 2.2 kW (3 HP) free-standing submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to…
The Pedrollo MCm 30/65 is a 2.2 kW (3 HP) free-standing submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to…
The Pedrollo MC 15/50 is a 1.1 kW (1.5 HP) free-standing submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC 20/50 is a 1.5 kW (2 HP) free-standing submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC 30/50 is a 2.2 kW (3 HP) free-standing submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC 40/50 is a 3 kW (4 HP) free-standing submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC 30/65 is a 2.2 kW (3 HP) free-standing submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC 40/65 is a 3 kW (4 HP) free-standing submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo MC Free-Standing Double-Channel Sewage Pumps /50 and /65. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.