Pedrollo MC Double-Channel Sewage Pumps /45
The Pedrollo MC /45 is a submersible double-channel sewage pump in thick cast iron, for draining dirty water with suspended solids and sewage in domestic and civil settings. Four models, two single-phase and two three-phase, deliver up to 750 l/min and up to 14 m head, with motors of 0.75 and 1.1 kW.
Cast iron pump body with cataphoresis treatment, micro-cast AISI 304 two-channel impeller passing solids up to Ø 50 mm, AISI 304 base and motor cover, AISI 431 shaft and a double mechanical seal with an oil chamber. 2″ threaded delivery, 10 m cable, installation to 10 m depth. Single-phase MCm models include a float switch and Schuko plug.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| MCm 10/45 | 2301620 | Single Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| MCm 15/45 | 2301630 | Single Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| MC 10/45 | 2301640 | Three Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| MC 15/45 | 2301650 | Three Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
4 products
The Pedrollo MCm 10/45 is a 0.75 kW (1 HP) submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to 600…
The Pedrollo MCm 15/45 is a 1.1 kW (1.5 HP) submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to 750…
The Pedrollo MC 10/45 is a 0.75 kW (1 HP) submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to 600…
The Pedrollo MC 15/45 is a 1.1 kW (1.5 HP) submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to 750…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo MC Double-Channel Sewage Pumps /45. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.