Name: Ebara CDXHSM/E 200/12 Stainless Centrifugal Pump, Hard-Face Seal 230v - 1635104900E
Brand: Ebara
SKU: 1635104900E
Price: 1152 GBP
Availability: InStock

Ebara CDXHSM/E 200/12 Stainless Centrifugal Pump, Hard-Face Seal 230v - 1635104900E

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

Ebara CDXHSM/E 200/12 single-stage centrifugal pump in pressed AISI 304 stainless steel, fitted with Ebara’s HS hard-face mechanical seal — silicon carbide on silicon carbide faces with an FPM (Viton) bellows, for longer seal life with scale and fine particles.

1.1 kW 230v single-phase motor with built-in capacitor and thermal overload. G1½″ suction × G1″ discharge, 8 bar maximum working pressure.

22.8 m

Max head

250 l/min

Max flow

1.1 kW

230v 1ph

SiC / SiC

Seal faces

Hard water areas
Fine particles
Washing systems
Process water

Clean or lightly contaminated water — not for solids or sludge. On water, Ebara recommend a maximum of 75 °C.

Full Description

More about this product

Full Description

The Ebara CDXHSM/E 200/12 is a single-stage, end-suction centrifugal pump in pressed AISI 304 stainless steel, built with Ebara’s optional HS hard-face mechanical seal. Both seal faces are silicon carbide, carried on an FPM (Viton) bellows with an AISI 316 frame and spring. Silicon carbide is far harder than the standard ceramic/carbon pair, so it stands up better to limescale, fine suspended particles and occasional poor lubrication. Hydraulically it is identical to the standard CDX 200/12: 22.8 m head at closed valve and flows up to 250 l/min.

22.8 m

Maximum head

250 l/min

Maximum flow

1.1 kW

Single phase 230v

110°C

Maximum fluid temp

8 bar

Max working pressure

Seal and construction

Silicon carbide faces

SiC on SiC — the hardest common seal pairing, resisting wear from scale and fine abrasives.

Bellows design

FPM bellows seal with AISI 316 frame, spring and spacer ring.

Rated to 110°C

Seal rated to 110°C fluid temperature, against 90°C for the standard Ebara CDX seal.

All-stainless wetted parts

Pressed AISI 304 casing, impeller and casing cover; AISI 303 shaft.

Hot water note: Ebara rate this seal to 110°C, but where the pumped fluid is water they recommend a maximum of 75°C with FPM elastomers for the longest seal life. For continuous hot water service above 75°C, ask us about the E-seal (EPDM) version, rated to 120°C.

Performance

Flow (l/min)	Flow (m³/h)	Head (m)
80	4.8	21.3
90	5.4	21
110	6.6	20.4
130	7.8	19.7
160	9.6	18.5
180	10.8	17.6
210	12.6	16
250	15	14

Recommended working range from the Ebara CDX 50Hz data book (ISO 9906 Grade 3B). Closed-valve head 22.8 m. Do not run below 10% of best-efficiency flow.

Technical specification

Model	CDXHSM/E 200/12
Ebara part number	1635104900E
Pump type	Single-stage end-suction centrifugal, closed impeller
Mechanical seal	HS hard-face mechanical seal — bellows mechanical seal, 15 mm shaft
Seal faces	Silicon carbide rotary / silicon carbide stationary
Seal elastomers	FPM (Viton) bellows and O-ring
Seal metalwork	AISI 316 frame, spring and spacer ring
Fluid temperature	-5°C to +110°C (75°C max recommended on water)
Max working pressure	8 bar (0.8 MPa)
Suction / discharge	G1½” female / G1″ female (ISO 228-1)
Impeller diameter	132 mm
Motor power	1.1 kW
Supply	230v single phase (50Hz)
Full load current	6.6 A at 230v
Capacitor / overload	31.5 µF built in / thermal overload built in
Speed	2-pole, approx. 2800 rpm
Protection / insulation	IP55 / Class F, TEFC
Casing, impeller, cover	AISI 304 stainless steel (EN 1.4301)
Shaft	AISI 303 stainless steel
Bracket / motor housing	Aluminium
Bearings	6203 pump side / 6202 fan side, sealed
Noise	62 dB(A) at 1 m
Dimensions (L × W × H)	333 × 208 × 229.5 mm
Weight	12.5 kg

Typical applications

Hard-water areas where limescale shortens standard seal life
Water carrying fine suspended particles
Washing, rinsing and cleaning systems
Process and service water in light industry

FAQ

Why choose a hard-face seal?

Silicon carbide on both faces is much harder than ceramic and carbon, so it resists wear from scale and fine particles and tolerates short spells of poor lubrication better.

Can it pump dirty water?

The CDX is designed for clean or lightly contaminated water. The HS seal extends seal life with fine particles, but the pump is not for solids or sludge.

Is it self-priming?

No. The CDX is a standard centrifugal pump and needs a flooded suction or a foot valve with the casing primed before start-up.

Do I need a separate overload or starter?

No. The single-phase motor has a built-in capacitor and thermal overload.

Downloads

Data Sheet PDF
Download

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

Ebara CDXHS – Hard-Face Seal

Ebara CDXHSM/E 200/12 Stainless Centrifugal Pump, Hard-Face Seal 230v – 1635104900E

More about this product

Seal and construction

Performance

Technical specification

Typical applications

FAQ

More about this product

Seal and construction

Performance

Technical specification

Typical applications

FAQ

Related products