Evak Agivort Range
Evak Agivort 5.10 0.75kW 2″ Slurry Pump 400V
- Established 1975
- Trusted by thousands of customers
The Evak Agivort 5.10 (400V) is the three-phase version of the mid-size Agivort submersible slurry pump. Hydraulically it’s identical to the 230V model — 0.75 kW / 1 HP, 460 L/min, 12.5 m head, 2″ discharge — but it runs on a 400V three-phase supply and is supplied manual, without a float switch, for installations controlled from a panel or by an operator. That makes it the choice for fixed sump duty on industrial sites, treatment works and anywhere three-phase is already on the wall.
The Agivort name comes from Agitator + Vortex — the two features that define the pump. Solids in slurry settle and pack down at the bottom of a sump or excavation, and a standard sewage pump takes the clear water off the top and leaves the sludge behind. The Agivort’s 316 stainless steel agitator stirs that settled material back into suspension, and the vortex impeller passes it through without clogging, so the pump keeps shifting solids long after a standard pump would have stalled.
The pump body is FC200 cast iron with a heavy-grade 304 stainless steel motor housing. Motor cover and handle are Nylon 6 — the lightweight build shared with the 5.05; the 5.20 and 5.50 step up to a cast iron motor cover and stainless handle. Double mechanical seal in an oil chamber with an NBR oil seal, three-phase motor with no capacitor to fail, and 10 m H07RN-F cable. 18 kg.
Key features
Construction
Applications
Technical specifications
| Model | Evak Agivort 5.10 (400V) |
| Series | Evak Agivort — cast iron submersible slurry pump with agitator |
| Voltage / phase | 400V three-phase, 50 Hz |
| Motor output | 0.75 kW (1 HP) |
| Full load current | Confirm with supplier |
| Poles / speed | 2 pole / 2850 rpm |
| Operation | Manual (no float switch) |
| Discharge | 50 mm (2″) |
| Max head | 12.5 m |
| Max flow rate | 460 L/min |
| Max liquid temperature | 40 °C |
| Impeller | Vortex, cast iron |
| Agitator | 316 stainless steel, below impeller |
| Pump casing | FC200 cast iron |
| Motor housing / shaft | 304 stainless steel |
| Motor cover / handle | Nylon 6 |
| Mechanical seal | Double mechanical, oil chamber with NBR oil seal |
| Cable | H07RN-F, 10 m |
| Dimensions (W × L × H) | 228 × 150 × 487 mm |
| Weight (without cable) | 18 kg |
More about this product
The Evak Agivort 5.10 (400V) is the three-phase version of the mid-size Agivort submersible slurry pump. Hydraulically it’s identical to the 230V model — 0.75 kW / 1 HP, 460 L/min, 12.5 m head, 2″ discharge — but it runs on a 400V three-phase supply and is supplied manual, without a float switch, for installations controlled from a panel or by an operator. That makes it the choice for fixed sump duty on industrial sites, treatment works and anywhere three-phase is already on the wall.
The Agivort name comes from Agitator + Vortex — the two features that define the pump. Solids in slurry settle and pack down at the bottom of a sump or excavation, and a standard sewage pump takes the clear water off the top and leaves the sludge behind. The Agivort’s 316 stainless steel agitator stirs that settled material back into suspension, and the vortex impeller passes it through without clogging, so the pump keeps shifting solids long after a standard pump would have stalled.
The pump body is FC200 cast iron with a heavy-grade 304 stainless steel motor housing. Motor cover and handle are Nylon 6 — the lightweight build shared with the 5.05; the 5.20 and 5.50 step up to a cast iron motor cover and stainless handle. Double mechanical seal in an oil chamber with an NBR oil seal, three-phase motor with no capacitor to fail, and 10 m H07RN-F cable. 18 kg.
Key features
Construction
Applications
Technical specifications
| Model | Evak Agivort 5.10 (400V) |
| Series | Evak Agivort — cast iron submersible slurry pump with agitator |
| Voltage / phase | 400V three-phase, 50 Hz |
| Motor output | 0.75 kW (1 HP) |
| Full load current | Confirm with supplier |
| Poles / speed | 2 pole / 2850 rpm |
| Operation | Manual (no float switch) |
| Discharge | 50 mm (2″) |
| Max head | 12.5 m |
| Max flow rate | 460 L/min |
| Max liquid temperature | 40 °C |
| Impeller | Vortex, cast iron |
| Agitator | 316 stainless steel, below impeller |
| Pump casing | FC200 cast iron |
| Motor housing / shaft | 304 stainless steel |
| Motor cover / handle | Nylon 6 |
| Mechanical seal | Double mechanical, oil chamber with NBR oil seal |
| Cable | H07RN-F, 10 m |
| Dimensions (W × L × H) | 228 × 150 × 487 mm |
| Weight (without cable) | 18 kg |
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Submersible pumps specifically designed for uses in narrow pits with dimensions down to 20 cm x 20 cm. Suitable to pump clear water containing particles…
The Ebara Best One MA is a submersible electric pump for clean water with maximum solid sizes of 10mm in 304 stainless steel. Applications -…
The Ebara Idrogo is a 5" submersible multistage pump designed for clean water applications including well pumping, pressure boosting, garden irrigation and domestic water supply.…
DOMO series, stainless steel electric pumps, are available with twin-channel or vortex impeller (DOMO VX). Designed to handle suspended solids up to 50mm in diameter…
Submersible sewage pump with a 40mm solids handling capacity. Cast iron construction suitable for pumping light domestic waste effluent septic tanks and large basements/cellars.
Lowara DOC Pumps Submersible pumps for drainage, infiltration water and emptying of pools, ponds, tanks and reservoirs. The DOC pump is mainly made of stainless…
Frequently Asked Questions
Quick answers to common questions about the Evak Agivort 5.10 0.75kW 2″ Slurry Pump 400V. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.