Evak Agivort 5.05 0.37kW 2" Slurry Pump 230V

Name: Evak Agivort 5.05 0.37kW 2" Slurry Pump 230V
Brand: EVAK
SKU: evakAgivort5.05230
Price: 424.8 GBP
Availability: InStock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

The Evak Agivort 5.05 (230V) is the entry-point slurry pump in the Agivort range, in 230V single-phase auto for portable and hire-fleet use. 0.37 kW / 0.5 HP motor, 2″ discharge, FC200 cast iron pump body with 316 stainless steel agitator and vortex impeller for genuine slurry handling.

Built for water other pumps can’t shift — sludge, slurry, sediment-laden site water. The agitator stirs settled solids back into suspension and the vortex impeller passes them through without clogging. Internal capacitor, auto float switch included.

0.37 kW

Motor output

310 L/min

Max flow

9 m

Max head

316 SS

Agitator

230V single-phase
Auto float switch
316 SS agitator
Vortex impeller
Double mechanical seal
Hire-fleet grade

Entry-level Agivort — 0.5 HP. 230V single-phase only — no 400V variant in this size. For higher flow, see the Agivort 5.10 (0.75 kW) or 5.20 (1.5 kW). For sewage with large solids see the Evak Hippo range; for silty site water without heavy sludge see the Trenchman range.

Full Description

More about this product

Full Description

The Evak Agivort 5.05 (230V) is the entry-point pump in the Agivort submersible slurry range — the smallest of the four models, built for portable use, small-scale sump duty and hire fleets serving the construction market. A 0.37 kW / 0.5 HP 2-pole single-phase motor drives a vortex impeller on a stainless steel shaft.

The Agivort name comes from Agitator + Vortex — the two features that define the pump. Solids in slurry settle and pack down at the bottom of a sump or excavation, and a standard sewage pump takes the clear water off the top and leaves the sludge behind. The Agivort’s 316 stainless steel agitator stirs that settled material back into suspension, and the vortex impeller passes it through without clogging, so the pump keeps shifting solids long after a standard pump would have stalled.

The pump body is FC200 cast iron with a heavy-grade 304 stainless steel motor housing. The motor cover and handle are Nylon 6 — the lightweight build shared with the 5.10; the 5.20 and 5.50 step up to a cast iron motor cover and stainless handle. Double mechanical seal running in an oil chamber with an NBR oil seal, and an internal capacitor so no external starter box is needed. Integrated float switch for unattended sump duty, supplied with 10 m cable.

Key features

0.37 kW

Motor output

0.5 HP

Horsepower

2″

Discharge

310 L/min

Max flow

9 m

Max head

13 kg

Weight

Construction

316 stainless steel agitator

The defining feature. Rotates below the impeller to stir settled sludge back into suspension — keeps solids moving so the pump keeps pumping.

Vortex impeller

Non-clogging vortex design pairs with the agitator to pass agitated slurry through the pump without blocking.

FC200 cast iron pump body

Heavy-duty FC200 cast iron casing and impeller for long service life in abrasive slurry.

304 stainless motor housing

Heavy-grade 304 stainless steel motor housing and stainless shaft. Nylon 6 motor cover and handle keep the weight down for portable use.

Double mechanical seal

Two mechanical seals in an oil chamber with an NBR oil seal — the hard-wearing arrangement abrasive duty needs.

Auto float switch & internal capacitor

Integrated pendant float for unattended sump duty, and the start capacitor is built into the motor — plug in and go, no separate control box.

Applications

Construction site dewatering

Small-scale site sump duty with sediment-laden water — the agitator keeps solids moving where a standard pump would clog.

Slurry & sludge pumping

Small-volume slurry, sludge and heavily suspended-solid water where clean-water pumps quickly fail.

Settlement tank cleaning

Small settlement tanks, sediment traps and lagoons where sludge needs stirring and evacuating.

Hire fleets

Robust, portable slurry pump for tool-hire operators serving construction and civils — small, light and repairable.

Utilities & civils

Chamber pumping, sump clearance and small-scale sediment evacuation on utility maintenance work.

Maximum liquid temperature 40 °C. Auto float switch operation. Not for potable water, sewage with large solids (see Hippo range) or corrosive fluids (see Stainox range). For higher flow see the Agivort 5.10 (0.75 kW, 230V or 400V) or 5.20 (1.5 kW, 230V or 400V). For silty trench water without heavy sludge see the Evak Trenchman range.

Technical specifications

Model	Evak Agivort 5.05 (230V)
Series	Evak Agivort — cast iron submersible slurry pump with agitator
Voltage / phase	230V single-phase, 50 Hz
Motor output	0.37 kW (0.5 HP)
Full load current	Confirm with supplier
Starting	Internal capacitor
Poles / speed	2 pole / 2850 rpm
Operation	Auto (pendant float switch)
Discharge	50 mm (2″)
Max head	9 m
Max flow rate	310 L/min
Max liquid temperature	40 °C
Thermal protection	Auto-reset thermal protector
Impeller	Vortex, cast iron
Agitator	316 stainless steel, below impeller
Pump casing	FC200 cast iron
Motor housing / shaft	304 stainless steel
Motor cover / handle	Nylon 6
Mechanical seal	Double mechanical, oil chamber with NBR oil seal
Cable	10 m
Dimensions (W × L × H)	228 × 150 × 412 mm
Weight (without cable)	13 kg

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

Frequently Asked Questions

Quick answers to common questions about the Evak Agivort 5.05 0.37kW 2″ Slurry Pump 230V. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What is a submersible pump?

A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.

Can submersible pumps handle solids and sewage?

Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.

When should I use a submersible pump instead of a surface pump?

Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.