EVAK EUB-M range
The EVAK EUB-M range are heavy-duty industrial contractor dewatering pumps designed for arduous site drainage on commercial and civil projects where the Drainox and Trenchman ranges lack capacity. FC-200 cast iron pump body, heavy-gauge stainless steel motor housing, outer casing and suction strainer, with high chrome steel impellers that outlast standard cast alternatives in gritty, abrasive water. Discharge sizes from 50mm to 150mm and motor ratings from 1.5kW to 15kW.
| Model | Outlet | Power | Voltage | Max Flow | Max Head |
|---|---|---|---|---|---|
| 50EUB-M-5.20S | 2" | 1.5kW | 230V | 500 l/min | 23m |
| 50EUB-M-5.20T | 2" | 1.5kW | 400V | 450 l/min | 21m |
| 50EUB-M-5.30T | 2" | 2.2kW | 400V | 550 l/min | 26m |
| 80EUB-M-5.20S | 3" | 1.5kW | 230V | 690 l/min | 17m |
| 80EUB-M-5.20T | 3" | 1.5kW | 400V | 630 l/min | 16m |
| 80EUB-M-5.30T | 3" | 2.2kW | 400V | 700 l/min | 23m |
| 80EUB-M-5.50T | 3" | 3.7kW | 400V | 900 l/min | 30m |
| 100EUB-M-5.50T | 4" | 3.7kW | 400V | 1,400 l/min | 18.5m |
| 100EUB-M-5.75T | 4" | 5.5kW | 400V | 1,900 l/min | 23m |
| 100EUB-M-5.100 | 4" | 7.5kW | 400V | See performance curve | |
| 100EUB-M-5.150 | 4" | 11kW | 400V | See performance curve | |
| 150EUB-M-5.100 | 6" | 7.5kW | 400V | See performance curve | |
| 150EUB-M-5.200 | 6" | 15kW | 400V | See performance curve | |
- FC-200 cast iron pump body with heavy-gauge stainless steel motor housing, outer casing and suction strainer
- High chrome steel impellers - outlast standard cast alternatives in abrasive water
- Double mechanical seal in oil bath - upper CA/CE, lower SIC/SIC
- Klixon motor protection (auto-reset thermal protector)
- 9-10mm free passage across the range - handles suspended solids and grit
- NBR diffuser, 10m H07RN-F cable, cable anchorage device
- Carry handle and lifting eyes for site handling
9 products
The Evak 50EUBM-5.20S is a 2″ lightweight submersible dewatering pump for arduous site drainage. 1.5 kW / 2 HP single-phase 230V motor, semi-open high chrome steel impeller,…
The Evak 50EUBM-5.20T is a 2″ lightweight submersible dewatering pump for arduous site drainage. 1.5 kW / 2 HP three-phase 400V motor, semi-open high chrome steel impeller,…
The Evak 50EUBM-5.30T is a 2″ lightweight submersible dewatering pump for demanding site drainage. 2.2 kW / 3 HP three-phase 400V motor, semi-open high chrome steel impeller,…
The Evak 80EUBM-5.20S is a 3″ lightweight submersible dewatering pump for high-volume site drainage. 1.5 kW / 2 HP single-phase 230V motor, semi-open high chrome steel impeller,…
The Evak 80EUBM-5.20T is a 3″ lightweight submersible dewatering pump for high-volume site drainage. 1.5 kW / 2 HP three-phase 400V motor, semi-open high chrome steel impeller,…
The Evak 80EUBM-5.30T is a 3″ lightweight submersible dewatering pump for demanding high-volume site drainage. 2.2 kW / 3 HP three-phase 400V motor, semi-open high chrome steel…
The Evak 80EUBM-5.50T is a heavy-duty 3″ submersible dewatering pump for major site drainage. 3.7 kW / 5 HP three-phase 400V motor, semi-open high chrome steel impeller,…
The Evak 100EUBM-5.50T is a heavy-duty 4″ submersible dewatering pump for major high-volume site drainage. 3.7 kW / 5 HP three-phase 400V motor, semi-open high chrome steel…
The Evak 100EUBM-5.75T is the top-of-range 4″ submersible dewatering pump in the EUB-M series. 5.5 kW / 7.5 HP three-phase 400V motor, semi-open high chrome steel impeller,…
Frequently Asked Questions
Quick answers to common questions about the EVAK EUB-M range. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.