JS GS/T Sewage Pumps
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail.
Tungsten carbide cutters and grinding rings which allow up to 28,000 cuts per minute. Used for domestic and industrial applications where either high heads or long ditances prohibit the use of standard submersibles or large discharge pipe is unavailable or uneconomical to install.
When used in sewage package stations and full control is required see our range of control panels and floats.
Cast iron pump body, impeller, lower motor bearing/seal housing and motor top cover. Stainless steel shaft and motor case. Twin mechanical seals, carbon ceramic and silicon carbide.
Complete with 10 metres of power cable.
10 products
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
JS GS Series are submersible sewage grinder pumps. Available as standard as free standing or can be guide rail mounted. See 020-501S for guide rail. Tungsten carbide…
Frequently Asked Questions
Quick answers to common questions about the JS GS/T Sewage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.