Mainsboost Charger
Mainsboost Charger Wall Mounted MBC 12-22 WM 44725
In stock
- Established 1975
- Trusted by thousands of customers
Stuart Turner Mainsboost Charger Wall mounted
Mainsboost Charger Pumps are used in conjunction with Mainsboost Pressure Vessels, providing a direct on mains pump solution to offer increased water pressure and flow when the incoming mains cold water pressure does not meet minimum requirements.
Mainsboost Charger MBC 12 pump units are wall mounted, allowing the pump to be located remotely from the Mainsboost vessel without restricting performance.
Housed within a robust steel enclosure lined with effective noise reduction foam, the Mainsboost Charger MBC 12 will boost water pressure up to 3.5 bar.
Mainsboost Charger MJ3 pump units are mounted directly onto the Mainsboost vessel and options are available suitable for use with vertical or horizontally oriented vessels.
The Mainsboost Charger MJ3 will boost water pressure up to 3.5 bar and an optional sound attenuation cover is available if the system is to be installed in a location where noise levels are to be kept to a minimum.
All Mainsboost Charger pumps are WRAS Approved and come with an industry leading 5 year guarantee as standard.
Mainsboost – performance on demand
More about this product
Mainsboost Charger MBC 12 Pumps are used in conjunction with Mainsboost Steel and Composite Pressure Vessels, providing a direct on mains pump solution to offer increased water pressure and flow when the incoming mains cold water pressure does not meet minimum requirements.
Mainsboost Charger MBC 12 pump units are wall mounted, allowing the pump to be located remotely from the Mainsboost vessel without restricting performance.
Housed within a robust steel enclosure lined with effective noise reduction foam, the Mainsboost Charger MBC 12 will boost water pressure up to 3.5 bar.
All Mainsboost Charger pumps are WRAS Approved and come with an industry leading 5 year guarantee as standard.
MBC 12 pumps are available with 22 mm or 28 mm bypass connection kits.
Mainsboost – performance on demand.
Technical Specification
| General | ||
| Model + Product Code | MBC 12-22 WM (44725) MBC 12-28 WM (44726) |
|
| Guarantee | 5 years | |
| WRAS approval | 1501305 | |
| System patent no. | 2349908 | |
| Noise | From 50 dB(A) | |
| Features | ||
| Mounting | Wall | |
| Pump type | Peripheral | |
| Mechanical seal | EPDM / PTFE / Al. Oxide | |
| Flexible hoses | 2 | |
| Dry run protection | ||
| Materials | ||
| Pump body | Brass | |
| Impeller | Brass | |
| Performance | ||
| Maximum head (closed valve) | 4.3 bar | |
| Maximum working pressure* | 600 kPa (6 bar) | |
| Maximum ambient air temperature | 40 °C | |
| Min / Max water temperature | Min 4 °C / Max 35 °C | |
| Connections | ||
| Pump connections | G ¾ male | |
| Bypass | MBC 12-22 WM 22 mm MBC 12-28 WM 28 mm |
|
| Flexible hoses | ||
| Connections | 22 mm push-in x 22 mm push-in x 240 mm long |
|
| Motor | ||
| Type | Induction, auto-reset thermal trip | |
| Duty rating | Continuous | |
| Electrical | ||
| Power supply/phase/frequency | 230 V a.c./ 1 / 50 Hz | |
| Current (full load) | 1.8 Amps | |
| Power consumption | 398 Watts | |
| Fuse rating | 3 Amps | |
| Power cable (pre-wired) | 1.5 metres | |
| Physical | ||
| Enclosure protection | IPX4 | |
| Width | 290 mm | |
| Depth | 180 mm | |
| Height (excluding hoses) | 465 mm | |
*The maximum pressure that can be applied to the pump under any installation conditions.
| Product Variants | |
| Part no | Description |
| 44725 | MBC 12-22 WM |
| 44726 | MBC 12-28 WM |
-
dimensions PDFDownload
-
data sheet PDFDownload
Standard delivery:
Standard delivery is free for all orders except some low cost or difficult to transport pumps where standard delivery is £6.20.
Standard delivery takes up to three working days for products that are in stock. Deliveries will be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
You may also need
Salamander AccuBoost Pump Upgrade Kit ACC-UPG-KIT Converts an unpumped AccuBoost to a pumped Increases mains flow up to 12 l/min Suitable for use with all…
Related products
Grundfos JP5 230v male Grundfos JP5 Pumps suits a number of domestic or commercial water supply jobs. Close-coupled centrifugal pumps with built-in ejector system designed…
DAB single variable speed booster pump sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses.
This DAB Aquajet Inox Automatic Self Priming Pressure Pump Unit is ideal for domestic, civil, agricultural and industrial use. With an automatic water lifting unit, stainless…
DAB 2 Euroinox AD Twin Pump Booster Set is equipped with Active Driver are designed and manufactured to meet the constant pressure requirements imposed by modern water…
DAB triple booster pump sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses.
A new range of compact electronic devices pressure/flow switches for control and protection of electric pumps.